2015 Beneteau 37 ft Oceanis 38 SCONNIE2
Sconnie2's upgrades and options:
B&G Auto Pilot
B&G Zeus Chart Plotter
Teak Cockpit Floor and Table
Wheel and Cockpit Table Covers
Manual Opening Transom
Convertible Salon Table
Review from Blue Water Sailing Magazine, December 2016
"The flexible nature of the interior and cockpit will appeal to singles, young couples, small families and to those whose children have sailed out of the house. Under sail and power the 38 handled exceptionally well and with a manageable sail plan this boat will have buyers away from the dock and under sail in short order for a day sail or weekend. For those with aspirations of longer distance cruising, I see the Oceanis 38 as an excellent coastal cruising platform that, with the right gear added, will be comfortable to live aboard at anchor, on a mooring or at a dock and will also make for a boat that can complete respectable daily runs."
"All in all, it looks as though the Beneteau Oceanis 38 is going to live up to the hype it has been getting, and for good reason. With a design that goes outside the box, we’ll surely be seeing lots of these boats out for day sails, weekends and longer cruises."
Review from Sail Magazine, July 30, 2014
The Beneteau Oceanis 38 shares the angular good looks of the rest of the Oceanis line and also breaks new ground in the area of interior design. Like most of Beneteau’s recent designs, the Oceanis 38 has aggressive angular lines with a nearly plumb bow and a slightly reverse transom. The low cabintop provides a nice profile while belying the amount of volume and headroom below.
Beam is carried well aft to a wide stern, but the boat’s twin rudders allow the hull to grip the water regardless of heel angle. A hard chine flowing from well forward all the way aft also helps keep the Oceanis 38 sailing up to five degrees flatter than it otherwise would. For anyone who’s had to brace themselves in a gust, that certainly makes a difference.
The hull is molded in polyester, with a hull liner bonded in at the beginning of the assembly process to increase stiffness. The deck is injection molded with a Saerfoam core to increase strength and reduce weight, after which it is secured to the hull with adhesives and screws, and then “trimmed” with a 1-inch toerail. The keel is cast iron. The rudder stocks are stainless steel.
Ex.plo.re is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Pier One Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
We are pleased to assist you in the purchase of this vessel. This boat is centrally listed by Pier One Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel.